OUR PRODUCTS

HIGH VOLTAGE GENERATORS DC

For High voltage consumers using up to 20 Watt

EPS-80-200-SPS
High voltage 0 - 80 kV
Controlled by potentiometer or PLC

ESV-100
High voltage 0 - 100 kV
Controlled by potentiometer

EPS-80-1,2
High voltage 0 - 90 kV, max. 1,2 mA
specially designed for automatic process machines

ESA-100-2,5
High voltage 0 - 100 kV, max. 2,5 mA
built-in in a movable desk-enclosure

Kleine Hochspannungserzeuger und Module
applied for filter-engineering, clean-room technology, electro-medicine, ion sources

HIGH VOLTAGE GENERATORS AC

HVU-60-2,5-60
High voltage 0 - 60 kV
For High voltage consumers 2,5 - 60 Hz

SPECIAL COMPONENTS

High voltage generator DC: EPS-80-200-SPS

For High voltage consumers using up to 20 Watt

  • Controlled by PLC
  • Preset of high voltage and spraying current
  • Feedback of actual values as 0/4 - 20 mA
  • Control limit switch with adjustable current input, 20 - 100 %
  • Connection of additional measuring devices is possible.
  • Analogue or digital
  • Supply voltage: 110 - 230 V AC, 50/60 Hz
  • High voltage output: 0 - 80 kV, max. 200 µA

Operative range and field of application:

  • General electrostatics
  • Varnishing
  • Flocking
  • Filtering
  • High- voltage testing instrument

High voltage generator: ESV-100

For High voltage consumers using up to 20 Watt

  • Small, lightweight (9 kg), portable, electronic high voltage
    generator used for small spraying equipment.
  • Suitable for hand-held equipment as used in the flocking industry.
  • Perfectly suitable as high voltage power pack for component
    and insulation testing.
  • High voltage output 0 - 100 kV DC adjustable at load up to
    200 µA.
  • High voltage output terminal in front or on backside touchpanel
  • SPC-capable with accessory board
  • Supply voltage: 110/230 V AC, 50/60 Hz
  • High voltage output: 100 kV DC, 200 µA

High voltage generator: EPS-80-1,2

specially designed for automatic process machines

  • Controlled by potentiometer or PLC
  • Preset of high voltage and spraying current,
    feedback of actual values as 0/4 - 20 mA.
  • Control limit switch with adjustable current input
    from 20 -100%
  • Connection of additional measuring devices
    (analogue or digital) is possible
  • Supply voltage: 110 - 230 V AC, 50/60 Hz
  • High voltage output: 0 - 80 kV, max. 1,2 mA

High voltage DC-generator: ESA-100-2,5

built-in in a movable desk-enclosure

  • Designed for a mean output range up to 250 watts
  • High voltage output adjustable 0 - 110 kV
  • Current control, adjustable 0,2 - 2,5 mA DC
  • Built-in discharging device for high voltage cable and consumer
  • Display of actual high voltage output 0 - 100 kV and the spray discharge 0 - 3 mA.
  • Simple high voltage cable connection with coupling ring-screw.
  • Supply voltages: 110/230 V AC 50/60 Hz
  • High voltage output: 110 kV, max 3 mA DC

    Operative range and field of application:

  • General electrostatic lines
  • Varnishing lines
  • Filtering installations
  • Coating lines
  • Enamelling lines

 

Small high voltage generators

applied for filter-engineering, clean-room technology, electro-medicine, ion sources

  • Supply voltages : 0-6/12/24 V DC; 110/230 V AC;
    50/60 Hz
  • High voltage output : 4, 8, 10,12, 20 kV DC
    at currents of 10 µA up to 2 mA

High Voltage Generator AC: HVU-60-2,5-60

We achieved success on the sector of the coated abrasives production by means of electrostatic scattering.

Our compact equipments are in use worldwide whether constant voltage or alternating voltage scattering with frequencies from 2,5 Hz - 60 Hz.

Our self-developed frequency transmitters and our control- and operational monitoring units are in use for more than 30 years to our customer‘s greatest satisfaction.

Enclosure installation / Control technique / Special machines

Regarding large coating machines, the drive components controlling high voltage generators are often installed in the same enclosure as the accompanying plant controlling components.

Depending on the range of application and comfort, these switchboard plants are designed as a relay control or SPC control with or without display. We follow standards and specifications for our customers worldwide.

The setup and testing of the equipment in our test lab
guarantees a trouble free production start up at the
customer‘s.

Uninterruptible power supply (UPS)

The more complicated the technology applied is, the more important it becomes to guarantee a constant power supply.

All data processing centre and telecommunication
systems have to be protected from problems of power
supply. Loss of data and troubles in system affected by power
failure or fluctuation of current have to be avoided.

A simple possibility to avoid damage or malfunction caused by power failure is the use of the uninterruptible power supply (UPS). On the one hand constant power is supplied and on the other irregularities deriving from the supply system are eliminated in one operation.

In case of a total power failure, a battery feeds the devices topping the UPS. In case of full load the topped systems are supported up to 10 min. and up to 30 min. in case of half load. Protection of people and equipment is guaranteed by that.

UPS - devices up to 3000 V. A. are single-phase designed. The broad range of input voltage from 110 V - 240 V +/- 25% at 47-65 Hz allows worldwide use.

It is possible to choose output voltages ranging from 100 V - 240 V +/- 3% at 50 or 60 Hz. Refer to the output there is a sinusoidal voltage available.

To increase the output parallel working is possible.

Considering power up to 100 k V.A. three-phased devices with input and output voltage of 220 V - 400 V and 50/60 Hz are applied.

Example: Micro 1000 Sinewave 100VA

Input Output
110 V110 V
230 V 230 V
110/230 V110 V

Special components

High voltage transfomers

  • High voltage transformer up to 100 kV output
    voltage and output of power up to 30 kVA
  • High voltage isolating transformers up to
    220 kV DC isolating voltage
  • Small high voltage transformers 2 kV - 10 kV and
    output of power from 3 VA up to 800 VA

High voltage diodes

  • hermetically sealed
  • connectable in series
  • very quick diodes 30ns

    for 2 - 10 KV DC, 1000 - 180 mA DC

    Examples:
    2 kV // 1 A / 100 ns / 50 ns / 30 ns
    5 kV – 12 kV // 25 mA / 50 ns / 30 ns
    10 kV // 400 mA / 50 ns / 30 ns

High voltage capacitors

-optional installation position-

Example:

  • 4,8,10,15 kVDC: 100 - 2.200 pF ceramics
  • 10 kVDC: 5.000 pF foil winding, hermetically sealed
  • 40-100 kVDC ; 5.000—40.000 pF foil winding in an insulating case or welded in a sheet steel case

High voltage resistors

- small construction at high capacity -

  • 5 kV DC; 470 KΩ
    500 MΩ - 10 GΩ ,
    5 x 15 x 2 mm
  • 15 kV DC; 20 KΩ - 680 MΩ,
    14 x 30 x 2 mm
  • 30 kV DC; 100 MΩ - 1 GΩ,
    Ø 7 x 150 mm

High voltage cable

  • Running meter or ready-made with connectors
  • AK-100 high voltage cable, screened, highly flexible up to 100 kV DC continuous duty, Ø approx. 10 mm
  • AK-300 high voltage cable, screened up to 300 kV DC, Ø approx. 22 mm
  • IK-100 high voltage cable, insulated up to 100 kV AC, application at pulsating current

High voltage connectors

  • Designed as disconnecting ground switch
    between high voltage generator and consumer
  • 100 kV DC, 1 A
  • drives: 230 V, 50/60 Hz or 24 VDC
    or pneumatically 2-6 bar
TOP